Engine Tuning

Posted December 30th, 2020 by Tony. Comments Off on Engine Tuning.

Investment in a remanufactured engine can become an expense and into a nightmare if not installed correctly, so it is vital spare no resources in training and technical training required for proper installation. INSTALLATION of the engine there are several older systems which is important to perfectly check when installing a remanufactured engine: System cooling system of lubrication system of supply of fuel computer the Engine Tuning more other (oil, intake manifold, distribution cover Pan) cooling system radiator radiator is the most important element of the cooling system. Block all some steps of water, and without a periodic change of antifreeze antifreeze chemicals adhere to the internal walls restricting step and avoiding the radiator to cool properly. According to the severity of the damage, it must be sent to probe the radiator, weld it or replace it. Responsible for radiator cap of maintain pressure in the cooling system, and when it is weak or defective, it reduces the boiling point, which causes overheating and causing damage to the newly installed engine. Indicated is replace radiator Cap with a new one. Water pump water pump that is not working correctly obviously will cause motor to overheat. They are very common faults in the pump, a bad bearing seal or a damaged gear.

The recommendation here is to always replace water pump with a new one. Thermostat, belts, hoses, fan, other key is replace the thermostat installing the correct for the type of vehicle taking temperature measurements appropriate for your engine, replace belts and hoses before the slightest sign of toughness or wear, replace fan if there are blades broken or bent, replace hopper and/or mechanism of fan if it is damaged. Check that there are no obstructions in the exhaust system (manifold, exhaust, muffler, catalytic converter).

Comments are closed.